Industry Software

IDX vs. Custom MLS Integration for Brokerages

A side-by-side guide for brokers deciding between an IDX vendor and a custom MLS integration on the RESO Web API: what each costs over three years, what you control, how MLS data rules apply, and the signs it's time to switch.

HS

Harasis Singh

Head of Engineering · November 15, 2026 · 8 min read

Aerial view of hillside homes, the kind of listings an IDX or custom MLS integration shows

Short answer

An IDX vendor rents you a ready-made listing search for a monthly fee, and it suits most agents and small brokerages. A custom MLS integration pulls the feed through the RESO Web API into your own database and pages. It costs more up front but gives you full control of search, design, SEO and lead routing, and works across several MLSs.

Most brokers start with an IDX vendor, and for many that's the right call. The question of IDX vs. custom MLS integration comes up later, when the vendor's search looks like every other site in town, listing pages don't rank, or leads land in a vendor inbox nobody checks. This guide compares the two side by side so you can decide with real numbers.

If you're new to the terms, start with our guide to what an IDX website is. This one assumes you know the basics and want to choose. We build custom listing platforms, including CitySeek, a Miami rental marketplace with more than 18,000 active listings, and we also tell brokers when a vendor plan is enough.

IDX vs. custom MLS integration side by side

Compared onIDX vendorCustom MLS integration
How listings reach your siteThe vendor holds the feed and renders search for youYour site receives the feed through the RESO Web API and stores it
Search and filtersThe vendor's design and filtersBuilt for your market, such as buildings, school zones or waterfront
SEOIframe plans give little. Organic plans index listing pagesEvery listing, building and neighborhood page is yours to optimize
Lead routingVendor inbox or a CRM connectorStraight into your CRM, tagged with the listing and routed by your rules
Several MLSsOften supported, with limited control over duplicatesOne merged search with duplicates removed
Up front costLittle or none$8,000-$40,000 at US agency rates
Monthly costTens to a few hundred dollarsHosting plus any MLS or data platform fee
If you leaveListing pages and their rankings go with the vendorPages, code and lead history stay with you

Key takeaway

IDX vendors sell convenience. A custom integration buys control. The right choice depends on how much of your lead flow comes from your own website.

What it costs over three years

Monthly fees look small until you add them up, and a build cost looks large until you spread it out. The figures below are illustrative US market prices for one MLS, not quotes, to show how the two paths compare over the life of a website.

Cost itemIDX vendor planCustom MLS integration
Setup or build$0-$1,000$8,000-$40,000
Monthly fees over 36 months$1,800-$10,800 ($50-$300 a month)$1,800-$7,200 hosting ($50-$200 a month)
MLS or data platform feesOften included or passed throughVaries by MLS, often tens of dollars a month
Changes to search or pagesLimited to vendor settingsBilled as development hours
Three-year totalAbout $2,000-$12,000About $10,000-$48,000 plus changes

Key takeaway

A custom build pays off when the extra leads from your own listing pages are worth more than the difference in cost. The monthly fee stays, as hosting instead of a vendor plan.

How a RESO Web API integration works

Almost every US MLS now delivers data through the RESO Web API, the standard that replaced the older RETS format. Many MLSs hand distribution to a data platform such as Trestle, Bridge, MLS Grid or Spark, so your developer connects to that platform with credentials issued to your brokerage.

  1. 1

    Approval

    You request the feed as the MLS member, your broker signs off, and the developer usually signs a vendor or technology agreement too. The access belongs to your brokerage.

  2. 2

    Initial load

    The integration pulls every active listing, its photos and its media into your own database.

  3. 3

    Updates

    It checks for changes on a schedule, often every few minutes, so new listings, price changes and status changes show up quickly. MLS rules usually require a refresh at least every 12 hours.

  4. 4

    Field mapping

    Each MLS names some fields its own way. The integration maps them to one model, which matters most when you combine more than one MLS.

  5. 5

    Display rules

    Listing brokerage attribution, the MLS disclaimer, and any fields that must stay hidden from the public are applied on every page.

  6. 6

    Removal

    Sold, expired and withdrawn listings leave the public site on time, which MLSs check.

MLS data feed types: IDX, VOW and broker back office

A custom integration isn't limited to the public IDX feed. Depending on your MLS and your agreements, you may also qualify for other feeds that a vendor plugin can't use the way you'd like.

FeedWhat it allowsTypical use
IDXPublic display of active listings from all participating brokersYour website's search and listing pages
VOW (virtual office website)More data, such as sold history in some MLSs, for registered users who accept termsLogged-in buyer portals and saved searches with sold comps
Broker back office (BBO)Wider data for internal use by the brokerage, not for public displayAgent tools, market reports, CRM enrichment

Key takeaway

Each feed has its own agreement and rules. Ask your MLS which ones your brokerage qualifies for before scoping a build.

When an IDX vendor is the better choice

  • You're a solo agent or small team and most leads come from portals, referrals and social, not your website.
  • You want listings on your site within days and don't plan to change how search works.
  • You don't have the time to own a codebase, even with a developer looking after it.
  • You use an organic IDX plugin that already puts listing pages on your own domain, and they are indexed.

Signs your brokerage has outgrown IDX

  • Your listing pages aren't indexed, or they rank under the vendor's domain instead of yours.
  • Buyers search your market by things the vendor doesn't filter on, such as condo buildings, golf communities or flood zones.
  • You belong to two or more MLSs and buyers see the same home twice.
  • Leads sit in a vendor dashboard and reach agents late or not at all.
  • You want an app, a buyer portal or an AI search feature built on the same listing data.
  • Your site is slow on phones because the vendor script loads on every page.

Moving from IDX to a custom integration without losing traffic

The risk in switching is search traffic. If the vendor's listing pages ranked, map their URLs to the new pages and set up permanent redirects before the vendor plan ends. Keep neighborhood and building pages at the same addresses where possible, run the new search alongside the old one for a short time, and check in Google Search Console that the new listing pages get indexed.

We cover the full build, including design, CRM connection and agent pages, on our real estate website development page. The access to your MLS feed is always granted to your brokerage, and we handle the technical side: the integration, the data model, the display rules and keeping it running. To see how leads from those pages get answered fast, read our guide to AI lead follow-up for brokers, and for the wider picture see real estate app development.

Questions

Things people ask before starting

Can't find what you're looking for? Reach out and we'll answer directly.

What is the difference between IDX and a custom MLS integration?

IDX through a vendor gives you the vendor's search, listing pages and lead forms on your site for a monthly fee. A custom MLS integration pulls the same listings through your MLS's data feed, usually the RESO Web API, into your own database, so your developer builds the search, pages and lead routing the way you want.

Is the RESO Web API the same as IDX?

No. IDX is the permission, under your MLS's rules, to show other brokers' listings on a public website. The RESO Web API is the technical standard most MLSs now use to deliver listing data. A custom integration uses the RESO Web API to receive an IDX feed, and sometimes a VOW or broker back office feed as well.

How much does a custom MLS integration cost?

At typical US agency rates, a custom integration with search, map view, listing pages and saved searches usually costs $8,000 to $40,000 to build, plus hosting and any data fee your MLS or its data platform charges. Each extra MLS adds field mapping and approval work. At Avenva, web app MVPs start from $1,000.

Can I combine listings from more than one MLS?

Yes, if you're a member of each MLS and each one approves your feed. A custom integration maps every feed to one set of fields, removes duplicate listings that appear in two MLSs, and applies each MLS's display rules to its own listings. Most IDX vendors support several MLSs too, but with less control over how duplicates and search work.

Who owns the MLS data in a custom integration?

Neither you nor your developer owns it. The data stays licensed to you by the MLS under your data agreement, which says what you can show, store and do with it. A custom build gives you control of the website, the code and the leads, while the MLS keeps its rules over the listings.